|
|
GuardMagic
TRIM1
Universal trailer
identification controller for mobile application:
trailers, semitrailers, fuel trailers, agricultural
machines etc.
|
|
|
|
|
GuardMagic TRIM1
is
the special device for
operation in vehicle/fleet management system and is
intended to
identification any towed equipments (trailers, fuel
trailers, etc) to main tractor.
GuardMagic
TRIM1
is install in
trailer and wired connected to main module
installed in tractor.
GuardMagic
TRIM1
has inique
factory number (module ID) and transmit this unique
ID by wire to main module located in tractor.
GuardMagic
TRIM1
allows to
check if the correct
trailer is coupled to the tractor unit.
GuardMagic TRIM1
allows by very economical way embed trailer
monitoring functionality in vehicle monitoring
system.
Main data:
input power
voltage (DC) operation:
|
|
communication
interface: |
|
operation:
|
|
communication model
in 485 bus:
|
|
communication
speed:
|
|
serial connection:
|
|
module ID:
|
|
addresses in EIA 485
(customer selected):
|
|
address
setting (customer):
|
|
address
representation in EIA-485 bus:
|
|
short ID:
|
-
12 bits (for
address 003)
|
standard ID:
|
-
19 bits (for
addresses 007 and 014)
|
full ID:
|
-
25 bits (for
address 022 and 23);
|
connection:
|
|
cable:
|
-
water (mixed
detergents/cleaners), oil, fuel, UF resistence
|
Operation Pressure:
|
|
Operation Condition:
|
- Indoor and
outdoor (IP57)
|
Enclosure Material:
|
|
Dimension without
glands and cables:
|
|
Operation Temperature:
|
|
|
In additional:
-
Protection:
over voltage and over
polarity;
-
Internal LED: YES;
-
Support standard LLS
communication protocol: YES;
-
One and more trailers
(module serial connection): YES
Why wired connection:
-
Only wired connection
allows 100% correct to identify the fact of trailer
connection of the trailer: that trailer is connected
to tractor, but nut simply located nearby.
-
Only wired connection
prevents false identification of trailer connection
when several trailers or tractors are nearby.
|