|
|
| |
SOLUTIONS IN
BRIEF - VEHICLE "Off-Line" FUEL & GPS MONITORING
(Post Trip
Fuel & GPS Monitoring)
|
|
| |
|
-
most inexpensive
and the most cost-effective solution for vehicle fuel and
GPS monitoring and vehicle fleet operation analyzing;
-
has not any
operation fees (visible or hidden);
- not needed any wireless
communication network;
- multi tank monitoring;
- high functionality and
wide range of application (vehicle, transportation, building
machinery, agricultural, fuel transportation, tractors etc);
|
/off-line%20monitoring.01.jpg) |
- monitoring
after vehicle is driven;
- monitor: vehicle
location and tracking, fuel consumption, fueling and
draining, driver activity;
- intelligent data logging;
- data downloaded to standard USB Flash
Drive;
- easy download data in any convenient
place;
- driver identification;
- not need any additional components
for downloading data to PC;
- not needed vehicle
parking while data moving to PC;
|
In general
System consist of next main components:
-
GuardMagic mTF3 ;
vehicle multifunction GPS and fuel
data logger
(multi tank support functionality)
|
GuardMagic mTF3 consist of: GPS receiver and memory
microcontroller board.
This device based on GPS signal calculate
vehicle coordinate and parameters vehicle of movement.
GuardMagic mTF3
module
completely automatically
carry out record the information in to internal memory
of the track (date, time, geographical coordinate),
parameters of movement (speed), information from
fuel level sensors, information from additional
external sensors etc.
After vehicle had return
to base you only have to remove data from module to PC
by standard USB flash drive.
|
-
GuardMagic DLLS1;
Robust digital fuel level sensor with
communication interface EIA-485
|
Make
measurement fuel level in fuel tank and send
fuel level code to main module (GuardMagic
mTF3).
|
-
Monitoring PC with
SmartTracer
monitoring software (Monitoring Station)
|
SmartTracer
monitoring software:
- receive
from USB flash drive information and
store received information in data base.
- analysis received
information,
- generate the series of
special reports and diagrams,
- visualization of tracks
and points on electronics maps,
- visualization
fueling and draining points in electronic maps,
- etc.
|
mTF3
module connection in vehicle:
/mTF3-connection.(500pix).jpg)
mTF3
module functionality in brief:
- installation
on any type of transport (truck, lorry, car,
tanker; combine, tractor, bulldozer, building
machinery etc.);
- protection
against data losing;
- fuel
monitoring (fuel history) up to 6 fuel tanks;
- digital
communication interface with fuel level sensors;
- "fuel
resolution" 1024 levels;
- GPS monitoring
(location, speed);
- connection to
additional circuits, sensors and monitoring
additional sensors;
|
- driver
identification function;
- vehicle
protection function (not using vehicle without
correct driver identification);
- active driver
history;
- two operation
mode: vehicle, special machinery,
- temperature
monitoring;
- 120 000
records;
- power supply
12 /24 volts;
- connection to
GuardMagic DLLS1 fuel level sensor or GuardMagic
DAFS sensor adapter;
- possibility to
connect to reserve battery.
|
|
|
