| 
                      
						 Monitoring 
						Module  | 
                      
                      
                        
                        
						
						GuardMagic 
						FSM2 module  in full automatic mode 
						collect information from Fuel Level Sensors, additional 
						sensprs and send this information by GSM/GPRS network 
						to monitoring station. 
                      
 
                       | 
                    
					
                      
                      
						- GuardMagic DLLS1a, 
						GuardMagic DLLS1b 
						fuel level sensor
 
						 
						 | 
                      
                      
								
								In fuel tank 
						installed 
								
								GuardMagic DLLS1 fuel level sensors. 
                      
						
								 
						
								
								GuardMagic DLLS1 
								sensor detects the level of the fuel in the fuel 
								tank, processing data and sends the information 
								about current fuel level in the form of digital 
								code (EIA-485 communication interface) to 
								monitoring module (GuardMagic 
								FSM)
						
								 
						
								
								GuardMagic DLLS1a 
								- fuel level sensor with ONE cable. Install in 
								the end of communication line or if use only one 
								sensor in communication line.
						
								
								GuardMagic DLLS1b 
								- fuel level sensor with TWO cables. Retransmit 
								communication interface (for easy sensor serial 
								connection).
						
								 
                       | 
                    
                    
                      | 
                      
						 | 
                      
                      
								
								For connection 
								fuel level sensor to main module (GuardMagic FSM).
						
								
								(Cable length can 
								be up to some hundreds meters)
						
								 
						
								
								Cable
								
								GM4.016: 
								for easy connection module GuardMagic FSM  
								to first fuel level sensor in communication bus 
								(GuardMagic DLLS1b).
						
								 
						
								
								Cable 
								
								GM4.017: 
								for easy connection second fuel level sensor (Guardmagic 
								DLLS1a) to first fuel level sensor in 
								communication bus GuardMagic DLLS1b. 
						
								
								     
								
                       | 
                    
                    
                      | 
                      
						 | 
                      
                      
						Power source for 
						powering main module and fuel level sensors | 
                    
                    
                      | 
                      
						 | 
                      
                      
                        
						As usual standard low 
						power AC/DC converter (or transformer + relay). 
						
						
                        
						Sensor input connected to 
						AC output of diesel generator.
						
                        
						Sensor output connected to 
						logical input of GuardMagic FSL (FSM) module.
                      
 
                       | 
                    
					
                      | 
                      
						 | 
                      
                      
                        
						Allow to connect pulse RPM 
						sensor.
						
                        
						Count the revolution of 
						engine.
						
                        
						Connect to GuardMagi FSM 
						module "pulses Input".
						
                        
						Also can be used like 
						"Operation Sensor".
						
                        (GuardMagic company don't 
						produce RPM sensor)
						
                         
                       | 
                    
					
                      | 
                      
						 | 
                      
                      
						
						Digital temperature 
						sensors based on 1-wire digital communication interface 
						by Maxim/Dallas semiconductor.
						
							
							Allow to measure 
							temperature of engine, air etc.
						
							
							GuardMagic FSM module 
							can support up to seven temperature sensors.
						
                        
						Digital temperature sensor
						
						
						GuardMagic DTS 
						series allow to measure temperature of air.
						
                         
                       | 
                    
					
                      | 
                      
						 | 
                      
                      
						
						Logical sensor has only 
						two output levels: High or Low (or contact: Open or 
						Close)
						
                         
                       | 
                    
                    
                      
                      
						- Communication network (GSM/GPRS 
                      + Internet)
 
						 
						 | 
                      
                      
                        
                        Communication channel for 
                        the sending information from  module to Monitoring  
						(Personal 
                        Computer).
                      
 
                       | 
                    
                    
                      | 
                      
						 | 
                      
                      
                        
						Monitoring station: 
						- collect all information from modules, store this 
						information in data base, 
						- analysis received information, 
						- generate the series of special reports and diagrams; 
						- monitor fuel consumption, fueling and fuel drain. 
						 
						Monitoring Station (monitoring service) consist of 
						server (or personal computer) and special monitoring 
						software:
						
                         
						
                        
						
						
						VehicleStation or
						
						
						FleetStation office 
						PC based monitoring software
						
                        
						or
						
                        
						
						
						PowerTrace WEB monitoring service.
                       |